-
Igwe ihe nchikota nke ahịrị okpukpu abụọ XLTC1020
A na-eji Window Patching Machine eme ihe n'ọtụtụ ebe na ihe nkiri ihe nkiri ka ọ bụrụ ngwugwu na ma ọ bụ na-enweghị windo igbe ekwentị, igbe mmanya, igbe akwa akwa, igbe ịchọ mma, igbe egwuregwu ụmụaka, mmiri ara ehi, kaadị wdg. Enwere ike iji ya rụọ ọrụ nke akwụkwọ gluing, ihe nkiri patching, ihe nkiri ịcha kaadị 200-500g /㎡na ọjà n'ime 3mm ọkpụrụkpụ.
-
Mberibe na imepe windo Patcher
A na-eji XLTC-1100Q Window Patching Machine n'ọtụtụ ebe na ntinye ihe nkiri na nkwado na ngwugwu na ma ọ bụ na-enweghị windo igbe ekwentị mkpanaaka, igbe mmanya, igbe onyinye, igbe akwa akwa, igbe ịchọ mma, igbe ihe egwuregwu ụmụaka, igbe mmiri ara ehi na kaadị.The kaadiboodu bụ 250-1200g/m2 na nwekwara ike itinye na ihe mmado punching, anwụ igbutu na creasing wdg maka pụrụ iche ọrụ.Enwere ike iji ya mee ihe maka ọrụ nke gluing akwụkwọ, ihe nkiri ihe nkiri, ịkpụ ihe nkiri, creasing na ikpochapụ ọrụ.
-
Mpempe akwụkwọ mpempe akwụkwọ Window Patching Machine
A na-eji XLTC-1020/1200 Window Patching Machine n'ọtụtụ ebe na ihe nkiri ihe nkiri ka ọ bụrụ ngwugwu na ma ọ bụ na-enweghị windo igbe ekwentị, igbe mmanya, igbe akwa nhicha, igbe ịchọ mma, igbe egwuregwu ụmụaka, mmiri ara ehi, kaadị wdg. ọrụ nke akwụkwọ gluing, ihe nkiri patching, ihe nkiri ịcha kaadị 200-500g / ㎡ na ọjà n'ime 3mm oké.
-
Ihe ntanye windo Maka igbe nkwakọ ngwaahịa
Igwe mkpuchi windo Xinlian akpaka bụ akụrụngwa pụrụ iche maka igbe katọn, igbe igbe agba agba; Echiche imewe nke ọma zuru oke iji hụ na igwe nwere njirimara nke arụmọrụ dị elu, nkenke dị elu, kwụsie ike na ọrụ dị mfe.
-
Igwe ndochi windo dị elu akpaaka
Enwere ike iji igwe ihe nkedo windo anyị maka kaadiboodu na mpempe akwụkwọ.Iji servo feeder, offset printing flexo modul, nkwụsi ike na nke ziri ezi nke diaphragm mbepụ na ịcha obe, iji nweta ihe nkiri windo dị ka igbe anụ ahụ, igbe onyinye, igbe ihe egwuregwu ụmụaka, igbe uwe elu, igbe mmiri ara ehi, wdg.
-
Igwe ihe nkpuchi ihe nkiri dị elu
Enwere ike iji igwe na-ekpuchi windo maka ọrụ nke gluing akwụkwọ, ihe nkiri ihe nkiri, ịcha ihe nkiri, creasing na ikpochapụ, na-eme ka ọsọ ọsọ na-arụ ọrụ dịkwuo mma.
-
Igwe mkpọchi windo dị elu
A na-eji Window Patching Machine eme ihe n'ọtụtụ ebe na nchikota ihe nkiri na nkwado na ngwugwu ya na ma ọ bụ na-enweghị windo igbe ekwentị mkpanaaka, igbe mmanya, igbe onyinye, igbe akwa akwa, igbe ịchọ mma, igbe ihe egwuregwu ụmụaka, mmiri ara ehi na kaadị.
-
Igwe eji eji plastik mee
Plastic Handle Machine bụ igwe emepụtara ọhụrụ, yana ikike ọgụgụ isi nke onwe ya, nwere ọkwa teknụzụ dị elu, njikwa akpaka, ọrụ dị mfe ma dị mfe, nchekwa na ntụkwasị obi, dabara maka ụdị igbe akwụkwọ, aka plastik na-arụ ọrụ, ọkachasị maka mmiri ara ehi. , ihe ọṅụṅụ, mmanya mmanya wdg.
-
Igwe mkpuchi pallet
1.Technical parameters nke wrapping igwe:
Ibu ngwaahịa: ≤2000Kg
Dayameta nke turntable: 1650mm
Nkwakọ ngwaahịa elu: 2000mm
Elu nke elu turntable si n'ala: 77mm
Ntugharị ọsọ: 12 rpm (a na-agbanwe agbanwe ugboro ole)
Ike moto na-atụgharị: 0.75kw
Moto ntọala anwụ na-ebu ụzọ gbatịa: 0.25kw
Ike moto na-ebuli: 0.37kw
Ike moto na-enye ihe nkiri: 0.37kw
N'ozuzu arọ: banyere 800kg
Ike ọkọnọ: AC 3￠220V/50Hz
2. Ọrụ nzọụkwụ nke wrapping igwe:
1) Gbanwuo ike.
2) Gbanyụọ ọkụ ọkụ na bọtịnụ nkwụsị mberede
3) Họrọ ọnọdụ ikuku chọrọ na ngbanwe panel.
4) Bugharịa ngwaahịa ahụ ka ọ bụrụ ngwugwu na turntable.
5) Na-arụ ọrụ mmalite mgba ọkụ, igwe na-amalite na-arụ ọrụ: swivel ọrụ, film etiti ọrụ,
6) Mgbe emechara ihe mkpuchi ahụ, akụrụngwa ga-akwụsị ozugbo wee tọgharịa ya
na-akpaghị aka.
7) The forklift na-ewepụ pallet ngwugwu, na a na-arụ ọrụ okirikiri na-agwụ.Usoro a na-arụ ọrụ.
8) Usoro ịgbatị ụzọ
9) N'okpuru forklift notch, dị mfe ịkwaga igwe dum -
Igwe mkpọchi windo na-arụ ọrụ dị elu
Tinyere ngwaọrụ ndị na-ahụ maka ụzọ na-aga n'ihu na mpaghara eletriki dị ka Programmable Logic Controller na igwe interface mmadụ wdg.
Igwe ihe ntanetị mmadụ nwere ike nyochaa ka igwe na-agba ọsọ, yana ntinye / mmepụta ọnụ na ụdị ihe mgbochi niile nke igwe, na mgbakwunye…
-
Igwe ihe nkiri patch na-agba ọsọ akpaaka
Enwere ike iji igwe na-ekpuchi windo a maka ọrụ nke gluing akwụkwọ, ihe nkiri ihe nkiri, ịkpụ ihe nkiri, creasing na ikpochapụ ọrụ.
-
1050 anwụ anwụ na creasing Machine
Anyị bụ ndị ọkachamara 1050 na-egbutu ma na-emepụta igwe na-emepụta ihe na ndị na-ebubata ya na China, ọkachamara n'inye akụrụngwa nkwakọ ngwaahịa katọn dị elu na ọnụahịa asọmpi.Anyị ji obi ụtọ na-anabata gị ka ịzụta 1050 anwụ anwụ na creasing igwe mere na China ebe a si anyị factory.
- [email protected]
- +86 13040060527
